The VWR Standard Heatblock II Cat. No. 13259-032 is a two-block analog dry bath heater designed for controlled heating and incubation of laboratory samples.
The unit provides selectable Low and High temperature ranges with independent analog adjustment controls. Its modular design accommodates two removable aluminum blocks simultaneously, allowing different laboratory tube and sample configurations.
Manufactured in the USA by Henry Troemner LLC for VWR, this unit has been tested and confirmed to heat properly using both Low and High settings.
Features
Two-block analog dry bath heater
Accommodates two interchangeable aluminum blocks
Selectable Low, Off, and High operating modes
Independent Low and High temperature controls
Heating status indicator
Modular block design
Durable metal housing
Tested in both Low and High settings
Specifications
Brand: VWR
Model: Standard Heatblock II
Catalog Number/MPN: 13259-032
Serial Number: 060114002
Heater Type: Analog dry block heater
Block Capacity: Two removable blocks
Low Temperature Range: Ambient +5°C to 100°C
High Temperature Range: 75°C to 150°C
Temperature Stability at 37°C: ±1.5°C
Temperature Stability at 60°C: ±4.0°C
Heat-Up Time to 100°C: Approximately 50 minutes
Voltage: 120 VAC
Frequency: 50/60 Hz
Power: 200 W
Phase: Single phase
Fuse: 5 A, fast-acting, 5 × 20 mm
Original Manufacturer: Henry Troemner LLC
Country of Origin: USA
Unit Dimensions: Approximately 15.4" D × 8" W × 3.5" H
Base Unit Weight: Approximately 6.4 lb without blocks
Packaged Dimensions: Approximately 24" × 16" × 12"
Packaged Weight: Approximately 15 lb
Included
VWR Standard Heatblock II 13259-032
Two removable aluminum blocks with different well configurations
Attached power cord
Includes all accessories shown in the photographs.
No tubes, thermometers, temperature probes, or additional blocks are included.
Condition
Pre-owned and in good cosmetic condition with minor marks and signs of normal laboratory use.
The unit was tested and confirmed to heat properly using both Low and High settings. The temperature adjustment controls, selector switch, and heating indicator are functioning.
Calibration status has not been verified. Professional calibration or temperature verification is recommended before quantitative, clinical, or regulated use.
Please review the photographs carefully, as they show the actual unit and included blocks.
Shipping
This item will be carefully packaged to ensure safe delivery.
Shipping costs are calculated automatically based on the buyer's location.
Local pickup is available in San Diego, California.
The VWR Standard Heatblock II Cat. No. 13259-032 is a two-block analog dry bath heater designed for controlled heating and incubation of laboratory samples.
The unit provides selectable Low and High temperature ranges with independent analog adjustment controls. Its modular design accommodates two removable aluminum blocks simultaneously, allowing different laboratory tube and sample configurations.
Manufactured in the USA by Henry Troemner LLC for VWR, this unit has been tested and confirmed to heat properly using both Low and High settings.
Features
Two-block analog dry bath heater
Accommodates two interchangeable aluminum blocks
Selectable Low, Off, and High operating modes
Independent Low and High temperature controls
Heating status indicator
Modular block design
Durable metal housing
Tested in both Low and High settings
Specifications
Brand: VWR
Model: Standard Heatblock II
Catalog Number/MPN: 13259-032
Serial Number: 060114002
Heater Type: Analog dry block heater
Block Capacity: Two removable blocks
Low Temperature Range: Ambient +5°C to 100°C
High Temperature Range: 75°C to 150°C
Temperature Stability at 37°C: ±1.5°C
Temperature Stability at 60°C: ±4.0°C
Heat-Up Time to 100°C: Approximately 50 minutes
Voltage: 120 VAC
Frequency: 50/60 Hz
Power: 200 W
Phase: Single phase
Fuse: 5 A, fast-acting, 5 × 20 mm
Original Manufacturer: Henry Troemner LLC
Country of Origin: USA
Unit Dimensions: Approximately 15.4" D × 8" W × 3.5" H
Base Unit Weight: Approximately 6.4 lb without blocks
Packaged Dimensions: Approximately 24" × 16" × 12"
Packaged Weight: Approximately 15 lb
Included
VWR Standard Heatblock II 13259-032
Two removable aluminum blocks with different well configurations
Attached power cord
Includes all accessories shown in the photographs.
No tubes, thermometers, temperature probes, or additional blocks are included.
Condition
Pre-owned and in good cosmetic condition with minor marks and signs of normal laboratory use.
The unit was tested and confirmed to heat properly using both Low and High settings. The temperature adjustment controls, selector switch, and heating indicator are functioning.
Calibration status has not been verified. Professional calibration or temperature verification is recommended before quantitative, clinical, or regulated use.
Please review the photographs carefully, as they show the actual unit and included blocks.
Shipping
This item will be carefully packaged to ensure safe delivery.
Shipping costs are calculated automatically based on the buyer's location.
Local pickup is available in San Diego, California.
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5
