The Shimadzu RF-1502 is a benchtop spectrofluorophotometer designed for fluorescence spectrum acquisition and quantitative laboratory measurements. It features a built-in display and control panel, independently controlled excitation and emission monochromators, and multiple external communication interfaces.
The physical identification badge on this instrument reads RF-1502. During startup, the installed operating system identifies itself as RF-1501 Ver. 1.2. An RF-1501 instruction manual and a separately packaged EPROM marked by hand “RF1502 V1.2b” are included.
The instrument was powered on and completed its internal initialization sequence. ROM, RAM, Backup RAM, EEPROM, excitation monochromator, and emission monochromator were all reported as OK. The system reached the main operating menu and displayed excitation and emission wavelength values.
No analytical measurement was performed with a sample. Wavelength accuracy, photometric performance, sensitivity, calibration status, lamp output, and remaining lamp life have not been verified.
Standalone benchtop spectrofluorophotometer
Built-in display and numeric control panel
Spectrum measurement mode
Quantitative measurement mode
Maintenance and diagnostic menu
Excitation and emission wavelength controls
Independent excitation and emission monochromators
RS-232C communication interface
Printer interface
External I/O connections
Sample compartment with removable access cover
Manufacturer: Shimadzu Corporation
Physical Model Identification: RF-1502
Installed System Identification: RF-1501 Ver. 1.2
Equipment Type: Spectrofluorophotometer
Light Source: 150 W xenon lamp, according to RF-1501 platform documentation
Documented Wavelength Scale: 220–900 nm and zero order
Documented Standard Measuring Range: 220–750 nm and zero order
Documented Spectral Bandwidth: 10 nm or 20 nm
Communication Interface: RS-232C
Additional Connections: Printer, I/O-1 and I/O-2
Approximate Reference Dimensions: 500 × 400 × 255 mm
Approximate Reference Weight: 23 kg
Asset Identification Visible on Unit: CS0405025
Calibration Status: Unknown
Lamp Hours and Remaining Lamp Life: Unknown
Country of Origin: Japan
The wavelength, optical, dimensional, and weight specifications are based on the RF-1501 platform documentation supplied with the instrument. The physical unit is identified as RF-1502, while the installed system currently displays RF-1501 Ver. 1.2.
Shimadzu RF-1502 Spectrofluorophotometer
Attached AC power cord
Shimadzu RF-1501 instruction manual
Separately packaged EPROM marked “RF1502 V1.2b”
Includes all accessories shown in the photographs.
The EPROM has not been installed, read, tested, or verified for compatibility. No computer, software, cuvettes, data cards, program cards, printer, interface cables, samples, or calibration materials are included unless shown.
This is a pre-owned laboratory instrument with cosmetic wear consistent with its age and previous use. The exterior exhibits age-related yellowing, scratches, scuffs, marks, discoloration, and finish wear. Please review all photographs for the exact cosmetic condition.
The instrument powers on and completes its internal initialization. ROM, RAM, Backup RAM, EEPROM, excitation monochromator, and emission monochromator are reported as OK. It reaches the operating menu and displays excitation and emission wavelength values.
The xenon lamp’s output, accumulated operating time, and remaining service life are unknown. No sample-based measurement, wavelength-accuracy verification, Raman sensitivity test, photometric performance test, calibration, or complete operational assessment was performed.
The physical badge identifies the unit as RF-1502; however, the installed system displays RF-1501 Ver. 1.2. The included EPROM marked “RF1502 V1.2b” is supplied as photographed without any representation regarding its contents, compatibility, installation, or functionality.
Professional inspection, calibration, and performance verification are recommended before use in quantitative, regulated, or quality-controlled applications.
Freight shipping is available throughout the United States. Shipping costs are quoted separately based on destination, delivery requirements, and final shipment dimensions.
Local pickup is available in San Diego, California.
Please complete the Freight & Local Pickup Request Form before purchasing to receive an accurate freight quote.
The Shimadzu RF-1502 is a benchtop spectrofluorophotometer designed for fluorescence spectrum acquisition and quantitative laboratory measurements. It features a built-in display and control panel, independently controlled excitation and emission monochromators, and multiple external communication interfaces.
The physical identification badge on this instrument reads RF-1502. During startup, the installed operating system identifies itself as RF-1501 Ver. 1.2. An RF-1501 instruction manual and a separately packaged EPROM marked by hand “RF1502 V1.2b” are included.
The instrument was powered on and completed its internal initialization sequence. ROM, RAM, Backup RAM, EEPROM, excitation monochromator, and emission monochromator were all reported as OK. The system reached the main operating menu and displayed excitation and emission wavelength values.
No analytical measurement was performed with a sample. Wavelength accuracy, photometric performance, sensitivity, calibration status, lamp output, and remaining lamp life have not been verified.
Standalone benchtop spectrofluorophotometer
Built-in display and numeric control panel
Spectrum measurement mode
Quantitative measurement mode
Maintenance and diagnostic menu
Excitation and emission wavelength controls
Independent excitation and emission monochromators
RS-232C communication interface
Printer interface
External I/O connections
Sample compartment with removable access cover
Manufacturer: Shimadzu Corporation
Physical Model Identification: RF-1502
Installed System Identification: RF-1501 Ver. 1.2
Equipment Type: Spectrofluorophotometer
Light Source: 150 W xenon lamp, according to RF-1501 platform documentation
Documented Wavelength Scale: 220–900 nm and zero order
Documented Standard Measuring Range: 220–750 nm and zero order
Documented Spectral Bandwidth: 10 nm or 20 nm
Communication Interface: RS-232C
Additional Connections: Printer, I/O-1 and I/O-2
Approximate Reference Dimensions: 500 × 400 × 255 mm
Approximate Reference Weight: 23 kg
Asset Identification Visible on Unit: CS0405025
Calibration Status: Unknown
Lamp Hours and Remaining Lamp Life: Unknown
Country of Origin: Japan
The wavelength, optical, dimensional, and weight specifications are based on the RF-1501 platform documentation supplied with the instrument. The physical unit is identified as RF-1502, while the installed system currently displays RF-1501 Ver. 1.2.
Shimadzu RF-1502 Spectrofluorophotometer
Attached AC power cord
Shimadzu RF-1501 instruction manual
Separately packaged EPROM marked “RF1502 V1.2b”
Includes all accessories shown in the photographs.
The EPROM has not been installed, read, tested, or verified for compatibility. No computer, software, cuvettes, data cards, program cards, printer, interface cables, samples, or calibration materials are included unless shown.
This is a pre-owned laboratory instrument with cosmetic wear consistent with its age and previous use. The exterior exhibits age-related yellowing, scratches, scuffs, marks, discoloration, and finish wear. Please review all photographs for the exact cosmetic condition.
The instrument powers on and completes its internal initialization. ROM, RAM, Backup RAM, EEPROM, excitation monochromator, and emission monochromator are reported as OK. It reaches the operating menu and displays excitation and emission wavelength values.
The xenon lamp’s output, accumulated operating time, and remaining service life are unknown. No sample-based measurement, wavelength-accuracy verification, Raman sensitivity test, photometric performance test, calibration, or complete operational assessment was performed.
The physical badge identifies the unit as RF-1502; however, the installed system displays RF-1501 Ver. 1.2. The included EPROM marked “RF1502 V1.2b” is supplied as photographed without any representation regarding its contents, compatibility, installation, or functionality.
Professional inspection, calibration, and performance verification are recommended before use in quantitative, regulated, or quality-controlled applications.
Freight shipping is available throughout the United States. Shipping costs are quoted separately based on destination, delivery requirements, and final shipment dimensions.
Local pickup is available in San Diego, California.
Please complete the Freight & Local Pickup Request Form before purchasing to receive an accurate freight quote.
