This incubator stack was procured from a Southern California clinical GMP storage facility that was shutting down a location. This unit had PM performed every 6 months, was very well taken care of, and is in excellent condition!
This unit has been tested and operates to manufacturer’s specifications.
Details:
Serial Numbers: 11050164, 11050165
Interior Volume: 170 L (ea.)
Exterior: Painted steel
Interior: Stainless steel containing copper
Outer Door: Painted steel
Inner Door: Tempered glass
Tray 3 trays made of stainless-steel containing copper
Tray Dimensions (WxDxH): 17.7 x 17.7 x 0.5 in.
Tray Max Load: 15.4 per tray
Rear Access Port (I.D.): 30 mm
Insulation: Rigid polyurethane foamed-in place
Heating System: 282W ~ DHA system (heater jacket + air jacket system)
Humidifying System: Natural evaporation with humidifying pan
Temperature Controller: PID control system
Temperature Display: Digital
CO2 Controller: ON-OFF control system/TC sensor
CO2 Density Display: Digital
Air Circulation: Fan assisted
Air Filter: 0.3μm, Efficiency; 99.97% or more
CO2 Inlet Connection: 4 to 6 mm diameter tube can be connected
CO2 inlet Pressure: 0.03MPaG (0.3kgf/cm2 G, 4.3psiG)
External Dimensions (WxDxH): 24.4 x 27.9 x 35.4 in. (ea.)
Internal Dimensions (WxDxH): 19.3 x 20.5 x 26.1 in. (ea.)
Weight: 445 lbs
This incubator stack was procured from a Southern California clinical GMP storage facility that was shutting down a location. This unit had PM performed every 6 months, was very well taken care of, and is in excellent condition!
This unit has been tested and operates to manufacturer’s specifications.
Details:
Serial Numbers: 11050164, 11050165
Interior Volume: 170 L (ea.)
Exterior: Painted steel
Interior: Stainless steel containing copper
Outer Door: Painted steel
Inner Door: Tempered glass
Tray 3 trays made of stainless-steel containing copper
Tray Dimensions (WxDxH): 17.7 x 17.7 x 0.5 in.
Tray Max Load: 15.4 per tray
Rear Access Port (I.D.): 30 mm
Insulation: Rigid polyurethane foamed-in place
Heating System: 282W ~ DHA system (heater jacket + air jacket system)
Humidifying System: Natural evaporation with humidifying pan
Temperature Controller: PID control system
Temperature Display: Digital
CO2 Controller: ON-OFF control system/TC sensor
CO2 Density Display: Digital
Air Circulation: Fan assisted
Air Filter: 0.3μm, Efficiency; 99.97% or more
CO2 Inlet Connection: 4 to 6 mm diameter tube can be connected
CO2 inlet Pressure: 0.03MPaG (0.3kgf/cm2 G, 4.3psiG)
External Dimensions (WxDxH): 24.4 x 27.9 x 35.4 in. (ea.)
Internal Dimensions (WxDxH): 19.3 x 20.5 x 26.1 in. (ea.)
Weight: 445 lbs
