PHCBi Multi-Gas Incubator MCO-170M-PA O2/CO2

$6,500.00

This unit comes from a laboratory that was downsizing operations. This Double Stack PHCBi Multi-Gas O2/CO2 Incubator MCO-170M-PA was tested and thoroughly cleaned.

The PHCBi MCO-170M-PA O2/CO2 Incubator offers the most precise regulation of oxygen and other gases, while maintaining superior temperature uniformity, contamination control, and usability. The Dual Infra Red sensor achieves ultra-fast CO2 recovery without overshoot, even following multiple door openings while the unique solid Zirconia O2 sensor delivers precise control of physiological oxygen levels to simulate in vivo conditions.

Specifications:

Dimensions, Exterior: 24.4″ W x 28.7″ D x 35.6″ H inches (62 x 73 x 90.5 cm)
Dimensions, Interior: 19.3″ W x 20.5″ D x 26″ H inches (49 x 52.3 x 66.5 cm)
Volume: 5.68 cu. ft. (161 liters)
Weight: 169.8 lbs (77 kg)
Temperature Control Range & Fluctuation: AT +5 ~ +50, ±0.1 °C
Temperature Uniformity: ±0.25 °C
CO2 Control Range & Fluctuation: 0 ~ 20, ±0.15 %
O2 Control Range & Fluctuation: 1 -18 and 22 – 80, ±0.2 %
Humidity Level & Fluctuation: 95, ±5 %RH
Sterilization Method: H2O2 Decontamination
Temperature Sensor: Thermistor
CO2 Sensor: Dual IR
O2 Sensor: Stabilized Zirconia Sensor
Display: Touch Panel (WVGA full color LCD) and USB data logging
Exterior Material: Painted Steel (rear cover not painted)
Interior Material: Stainless Steel Copper-Enriched Alloy
Insulation Material: Styrene AcryloNitrile copolymer
Heating Method: Direct Heat & Air Jacket System
Outer Doors: 1
Field Reversible Door: Included
Inner Doors: 4 gastight – made of tempered glass
Shelves: 3
Max. Load Per Shelf: 15.4 lbs (7 kg)
Max. Shelf Capacity: 10
Access Port: 1
Access Port Position: Rear Upper Left
Power Failure: R
Out of Temperature Setting: V-B-R
High Temperature: V-B-R
Out of CO2 Setting: V-B-R
Out of O2 Setting: V-B-R
Door Open: V-B
Noise Level: 25 dB

Shipping & Pickup Disclaimer
This item is listed for local pickup in the San Diego area. If you require shipping, please note that freight is billed separately and calculated on a case-by-case basis through our freight partners. We will provide you with a custom shipping quote as quickly as possible after purchase.

For the most accurate estimate, please contact us in advance with your delivery address and any special requirements (e.g., lift gate service, residential delivery). We work to make freight logistics smooth and cost-effective for you.

This unit comes from a laboratory that was downsizing operations. This Double Stack PHCBi Multi-Gas O2/CO2 Incubator MCO-170M-PA was tested and thoroughly cleaned.

The PHCBi MCO-170M-PA O2/CO2 Incubator offers the most precise regulation of oxygen and other gases, while maintaining superior temperature uniformity, contamination control, and usability. The Dual Infra Red sensor achieves ultra-fast CO2 recovery without overshoot, even following multiple door openings while the unique solid Zirconia O2 sensor delivers precise control of physiological oxygen levels to simulate in vivo conditions.

Specifications:

Dimensions, Exterior: 24.4″ W x 28.7″ D x 35.6″ H inches (62 x 73 x 90.5 cm)
Dimensions, Interior: 19.3″ W x 20.5″ D x 26″ H inches (49 x 52.3 x 66.5 cm)
Volume: 5.68 cu. ft. (161 liters)
Weight: 169.8 lbs (77 kg)
Temperature Control Range & Fluctuation: AT +5 ~ +50, ±0.1 °C
Temperature Uniformity: ±0.25 °C
CO2 Control Range & Fluctuation: 0 ~ 20, ±0.15 %
O2 Control Range & Fluctuation: 1 -18 and 22 – 80, ±0.2 %
Humidity Level & Fluctuation: 95, ±5 %RH
Sterilization Method: H2O2 Decontamination
Temperature Sensor: Thermistor
CO2 Sensor: Dual IR
O2 Sensor: Stabilized Zirconia Sensor
Display: Touch Panel (WVGA full color LCD) and USB data logging
Exterior Material: Painted Steel (rear cover not painted)
Interior Material: Stainless Steel Copper-Enriched Alloy
Insulation Material: Styrene AcryloNitrile copolymer
Heating Method: Direct Heat & Air Jacket System
Outer Doors: 1
Field Reversible Door: Included
Inner Doors: 4 gastight – made of tempered glass
Shelves: 3
Max. Load Per Shelf: 15.4 lbs (7 kg)
Max. Shelf Capacity: 10
Access Port: 1
Access Port Position: Rear Upper Left
Power Failure: R
Out of Temperature Setting: V-B-R
High Temperature: V-B-R
Out of CO2 Setting: V-B-R
Out of O2 Setting: V-B-R
Door Open: V-B
Noise Level: 25 dB

Shipping & Pickup Disclaimer
This item is listed for local pickup in the San Diego area. If you require shipping, please note that freight is billed separately and calculated on a case-by-case basis through our freight partners. We will provide you with a custom shipping quote as quickly as possible after purchase.

For the most accurate estimate, please contact us in advance with your delivery address and any special requirements (e.g., lift gate service, residential delivery). We work to make freight logistics smooth and cost-effective for you.