This custom-fabricated acrylic dual-port laboratory chamber is a transparent passive component intended for specialized laboratory, research, fluid-handling, or scientific instrumentation applications.
The unit features a machined clear acrylic body with an internal chamber and two metal threaded fittings installed through the top surface. These ports may be used for fluid inlet and outlet connections within a custom circulation, observation, sampling, or experimental system.
No manufacturer, model number, catalog number, MPN, serial number, or original application could be identified from the component or the available photographs. It is therefore being offered as an unbranded custom laboratory component, and compatibility must be determined by the buyer.
The component has been inspected by LabCycle Partners. No pressure, leak, vacuum, or flow testing has been performed.
Please review all photographs carefully to verify the construction, included components, dimensions, and suitability for your application.
Features
Custom-fabricated transparent acrylic laboratory chamber
Machined internal cavity
Two top-mounted threaded metal fittings
Clear construction allows visual observation of the chamber interior
Compact passive design
Suitable for custom laboratory systems, prototypes, research instrumentation, or fluid-handling applications
No electrical power required
Inspected by LabCycle Partners
Specifications
Brand: Unbranded
Product Type: Custom Acrylic Dual-Port Laboratory Chamber
Possible Configuration: Flow Cell / Fluid Chamber
Material: Clear Acrylic
Port Configuration: Two Top-Mounted Threaded Ports
Width: Approximately 3.5 in
Height: Approximately 5.0 in
Depth: Approximately 2.5 in
Weight: Approximately 0.8 lb
Power Requirement: None
Model: Not Identified
MPN: Does Not Apply
Country of Manufacture: Unknown
Original Application: Not Confirmed
Included
Custom acrylic laboratory chamber
Two installed metal threaded fittings
Includes all accessories shown in the photographs.
Condition
Excellent pre-owned cosmetic condition with minimal signs of normal laboratory use.
The acrylic body is structurally intact and retains good transparency. Light surface scratches, machining marks, residue, and minor cosmetic wear consistent with prior laboratory handling may be present. No visible cracks or significant structural damage were observed.
The component has been inspected by LabCycle Partners. No pressure, leak, vacuum, or flow testing has been performed.
Please review all photographs carefully, as they are part of the item description.
Shipping
This item will be carefully packaged to ensure safe delivery.
Shipping costs are calculated automatically based on the buyer's location.
Local pickup is available in San Diego, California.
This custom-fabricated acrylic dual-port laboratory chamber is a transparent passive component intended for specialized laboratory, research, fluid-handling, or scientific instrumentation applications.
The unit features a machined clear acrylic body with an internal chamber and two metal threaded fittings installed through the top surface. These ports may be used for fluid inlet and outlet connections within a custom circulation, observation, sampling, or experimental system.
No manufacturer, model number, catalog number, MPN, serial number, or original application could be identified from the component or the available photographs. It is therefore being offered as an unbranded custom laboratory component, and compatibility must be determined by the buyer.
The component has been inspected by LabCycle Partners. No pressure, leak, vacuum, or flow testing has been performed.
Please review all photographs carefully to verify the construction, included components, dimensions, and suitability for your application.
Features
Custom-fabricated transparent acrylic laboratory chamber
Machined internal cavity
Two top-mounted threaded metal fittings
Clear construction allows visual observation of the chamber interior
Compact passive design
Suitable for custom laboratory systems, prototypes, research instrumentation, or fluid-handling applications
No electrical power required
Inspected by LabCycle Partners
Specifications
Brand: Unbranded
Product Type: Custom Acrylic Dual-Port Laboratory Chamber
Possible Configuration: Flow Cell / Fluid Chamber
Material: Clear Acrylic
Port Configuration: Two Top-Mounted Threaded Ports
Width: Approximately 3.5 in
Height: Approximately 5.0 in
Depth: Approximately 2.5 in
Weight: Approximately 0.8 lb
Power Requirement: None
Model: Not Identified
MPN: Does Not Apply
Country of Manufacture: Unknown
Original Application: Not Confirmed
Included
Custom acrylic laboratory chamber
Two installed metal threaded fittings
Includes all accessories shown in the photographs.
Condition
Excellent pre-owned cosmetic condition with minimal signs of normal laboratory use.
The acrylic body is structurally intact and retains good transparency. Light surface scratches, machining marks, residue, and minor cosmetic wear consistent with prior laboratory handling may be present. No visible cracks or significant structural damage were observed.
The component has been inspected by LabCycle Partners. No pressure, leak, vacuum, or flow testing has been performed.
Please review all photographs carefully, as they are part of the item description.
Shipping
This item will be carefully packaged to ensure safe delivery.
Shipping costs are calculated automatically based on the buyer's location.
Local pickup is available in San Diego, California.
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5
