TMC 63541 Gimbal Piston Table
Vibration-Free Table, 63500 Series, Cleantop II
48" W x 30" D x 30" H - approx weight of base and top 500 lbs
Load Capacity: 500 lb
Type: Fixed Height
Increases accuracy and throughput of high-resolution inspection
Rigid all-welded frame produces lower natural frequency for more effective vibration damping
Gimbal piston isolators achieve both horizontal and vertical isolation down to very low input levels
Type: Fixed Height
Top Design: Solid
Top Material: Stainless Steel
Load Capacity: 500 lb
Width: 48"
Depth: 30"
Height: 30"
Item is listed as local pickup in the San Diego area. Please contact us for a shipping quote!
Benefits:
Vertical and horizontal vibration isolation starting at 2 Hz
Reduces vibration by more than 95% at 10Hz
Virtually free of friction, avoiding rolling friction to static friction transitions
Accommodates horizontal displacement by acting as a gimbal
The Gimbal Piston™ Air Isolator provides outstanding isolation in all directions for even the lowest input levels. It is lightly damped and highly responsive to typical, low-amplitude ambient floor vibrations, yet achieves very high damping for gross transient disturbances, such as sudden load changes or bumping the top plate. The result is that Gimbal Piston Isolators provide superior isolation yet will virtually eliminate any gross disturbance within a few seconds. It can also stabilize isolated systems with relatively high centers of gravity without compromising isolation.
Low-Amplitude Input Response
The greatest challenge in designing an effective isolator is to maintain good performance at the low vibration amplitude inputs typical of ambient building floor vibration. Isolator specifications are often based on measurements done with the isolator placed on a “shaker table” with very high amplitude input levels. Such testing, with input amplitudes on the order of millimeters, yields unrealistic performance expectations and is misleading as results will not reflect the actual performance in use.
The Gimbal Piston Isolator design is unique in its ability to maintain its stated resonant frequency and high level of attenuation in even the most quiet, real, floor environments. The performance is linear to such low amplitudes because the design is virtually free of friction and therefore able to avoid rolling friction to static friction transitions.
Every other system that we have tested at levels typical for floor vibration exhibits either a higher resonant frequency than claimed or a substantial increase in transmission through the isolator mount.
Vibration-Free Table, 63500 Series, Cleantop II
48" W x 30" D x 30" H - approx weight of base and top 500 lbs
Load Capacity: 500 lb
Type: Fixed Height
Increases accuracy and throughput of high-resolution inspection
Rigid all-welded frame produces lower natural frequency for more effective vibration damping
Gimbal piston isolators achieve both horizontal and vertical isolation down to very low input levels
Type: Fixed Height
Top Design: Solid
Top Material: Stainless Steel
Load Capacity: 500 lb
Width: 48"
Depth: 30"
Height: 30"
Item is listed as local pickup in the San Diego area. Please contact us for a shipping quote!
Benefits:
Vertical and horizontal vibration isolation starting at 2 Hz
Reduces vibration by more than 95% at 10Hz
Virtually free of friction, avoiding rolling friction to static friction transitions
Accommodates horizontal displacement by acting as a gimbal
The Gimbal Piston™ Air Isolator provides outstanding isolation in all directions for even the lowest input levels. It is lightly damped and highly responsive to typical, low-amplitude ambient floor vibrations, yet achieves very high damping for gross transient disturbances, such as sudden load changes or bumping the top plate. The result is that Gimbal Piston Isolators provide superior isolation yet will virtually eliminate any gross disturbance within a few seconds. It can also stabilize isolated systems with relatively high centers of gravity without compromising isolation.
Low-Amplitude Input Response
The greatest challenge in designing an effective isolator is to maintain good performance at the low vibration amplitude inputs typical of ambient building floor vibration. Isolator specifications are often based on measurements done with the isolator placed on a “shaker table” with very high amplitude input levels. Such testing, with input amplitudes on the order of millimeters, yields unrealistic performance expectations and is misleading as results will not reflect the actual performance in use.
The Gimbal Piston Isolator design is unique in its ability to maintain its stated resonant frequency and high level of attenuation in even the most quiet, real, floor environments. The performance is linear to such low amplitudes because the design is virtually free of friction and therefore able to avoid rolling friction to static friction transitions.
Every other system that we have tested at levels typical for floor vibration exhibits either a higher resonant frequency than claimed or a substantial increase in transmission through the isolator mount.
Vibration-Free Table, 63500 Series, Cleantop II
48" W x 30" D x 30" H - approx weight of base and top 500 lbs
Load Capacity: 500 lb
Type: Fixed Height
Increases accuracy and throughput of high-resolution inspection
Rigid all-welded frame produces lower natural frequency for more effective vibration damping
Gimbal piston isolators achieve both horizontal and vertical isolation down to very low input levels
Type: Fixed Height
Top Design: Solid
Top Material: Stainless Steel
Load Capacity: 500 lb
Width: 48"
Depth: 30"
Height: 30"
Item is listed as local pickup in the San Diego area. Please contact us for a shipping quote!
Benefits:
Vertical and horizontal vibration isolation starting at 2 Hz
Reduces vibration by more than 95% at 10Hz
Virtually free of friction, avoiding rolling friction to static friction transitions
Accommodates horizontal displacement by acting as a gimbal
The Gimbal Piston™ Air Isolator provides outstanding isolation in all directions for even the lowest input levels. It is lightly damped and highly responsive to typical, low-amplitude ambient floor vibrations, yet achieves very high damping for gross transient disturbances, such as sudden load changes or bumping the top plate. The result is that Gimbal Piston Isolators provide superior isolation yet will virtually eliminate any gross disturbance within a few seconds. It can also stabilize isolated systems with relatively high centers of gravity without compromising isolation.
Low-Amplitude Input Response
The greatest challenge in designing an effective isolator is to maintain good performance at the low vibration amplitude inputs typical of ambient building floor vibration. Isolator specifications are often based on measurements done with the isolator placed on a “shaker table” with very high amplitude input levels. Such testing, with input amplitudes on the order of millimeters, yields unrealistic performance expectations and is misleading as results will not reflect the actual performance in use.
The Gimbal Piston Isolator design is unique in its ability to maintain its stated resonant frequency and high level of attenuation in even the most quiet, real, floor environments. The performance is linear to such low amplitudes because the design is virtually free of friction and therefore able to avoid rolling friction to static friction transitions.
Every other system that we have tested at levels typical for floor vibration exhibits either a higher resonant frequency than claimed or a substantial increase in transmission through the isolator mount.
