MasterFlex L/S Peristaltic Pump Drive
Masterflex® L/S® Analog Variable-Speed Console Drive, 20 to 600 rpm; 115 VAC
Key Features
Flow rate 0.42 to 2900 ml/min with L/S tubing—flow rate depends on drive rpm, pump head, and tubing size
Simple operation with single-turn speed control
Separate power switch enables you to maintain speed setting when turning drive on/off; front-panel LED indicates power on
Reversible motor lets you easily prime/purge tubing and pump in either direction
Remote control of start/stop via DB9 connector on back of drive
This unit was purchased from a lab getting rid of extra supplies. This pump has been tested and works just as it should. Item is listed as local pickup in the San Diego area. Please contact us for a shipping quote!
More About This Item:
Compact and cost effective for general fluid transfer applications.
Drives accept nine different pump head types: Standard, Easy-Load®, Easy-Load II, Easy-Load 3, Multichannel, High-Performance, Cartridge, PTFE tubing, and PTFE-diaphragm. Drives 07555-00 and -05 are not recommended for use with the PTFE-tubing and PTFE-diaphragm pump heads.
Model 07555-00
Plug type US
Max. flow rate 2900 ml/min
No. of Pump Heads Accepted 1
Housing material Painted steel and ABS plastic
Max. RPM 600 rpm
Power 90 - 130 VAC; 50/60 Hz; 1.5 A
Cloud connected No
Control Type Analog Variable Speed
Digital dispensing No
Drive height 134 mm (5.3")
Drive IP rating IP 22
Drive length 230 mm (9.1")
Drive width 183 mm (7.2")
Min. RPM 20 rpm
Motor 37 W
Motor hp 1/20
Open-head sensor No
Pump series L/S
Remote I/O Start/Stop
Reversible motor Yes
Speed VariableSpeed control±5%
Type of pump heads accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, Multichannel, High-Performance, Cartridge
Washdown capable No
Current 1.5 A
Frequency 50/60 Hz
Voltage 90 - 130 VAC
Masterflex® L/S® Analog Variable-Speed Console Drive, 20 to 600 rpm; 115 VAC
Key Features
Flow rate 0.42 to 2900 ml/min with L/S tubing—flow rate depends on drive rpm, pump head, and tubing size
Simple operation with single-turn speed control
Separate power switch enables you to maintain speed setting when turning drive on/off; front-panel LED indicates power on
Reversible motor lets you easily prime/purge tubing and pump in either direction
Remote control of start/stop via DB9 connector on back of drive
This unit was purchased from a lab getting rid of extra supplies. This pump has been tested and works just as it should. Item is listed as local pickup in the San Diego area. Please contact us for a shipping quote!
More About This Item:
Compact and cost effective for general fluid transfer applications.
Drives accept nine different pump head types: Standard, Easy-Load®, Easy-Load II, Easy-Load 3, Multichannel, High-Performance, Cartridge, PTFE tubing, and PTFE-diaphragm. Drives 07555-00 and -05 are not recommended for use with the PTFE-tubing and PTFE-diaphragm pump heads.
Model 07555-00
Plug type US
Max. flow rate 2900 ml/min
No. of Pump Heads Accepted 1
Housing material Painted steel and ABS plastic
Max. RPM 600 rpm
Power 90 - 130 VAC; 50/60 Hz; 1.5 A
Cloud connected No
Control Type Analog Variable Speed
Digital dispensing No
Drive height 134 mm (5.3")
Drive IP rating IP 22
Drive length 230 mm (9.1")
Drive width 183 mm (7.2")
Min. RPM 20 rpm
Motor 37 W
Motor hp 1/20
Open-head sensor No
Pump series L/S
Remote I/O Start/Stop
Reversible motor Yes
Speed VariableSpeed control±5%
Type of pump heads accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, Multichannel, High-Performance, Cartridge
Washdown capable No
Current 1.5 A
Frequency 50/60 Hz
Voltage 90 - 130 VAC
Masterflex® L/S® Analog Variable-Speed Console Drive, 20 to 600 rpm; 115 VAC
Key Features
Flow rate 0.42 to 2900 ml/min with L/S tubing—flow rate depends on drive rpm, pump head, and tubing size
Simple operation with single-turn speed control
Separate power switch enables you to maintain speed setting when turning drive on/off; front-panel LED indicates power on
Reversible motor lets you easily prime/purge tubing and pump in either direction
Remote control of start/stop via DB9 connector on back of drive
This unit was purchased from a lab getting rid of extra supplies. This pump has been tested and works just as it should. Item is listed as local pickup in the San Diego area. Please contact us for a shipping quote!
More About This Item:
Compact and cost effective for general fluid transfer applications.
Drives accept nine different pump head types: Standard, Easy-Load®, Easy-Load II, Easy-Load 3, Multichannel, High-Performance, Cartridge, PTFE tubing, and PTFE-diaphragm. Drives 07555-00 and -05 are not recommended for use with the PTFE-tubing and PTFE-diaphragm pump heads.
Model 07555-00
Plug type US
Max. flow rate 2900 ml/min
No. of Pump Heads Accepted 1
Housing material Painted steel and ABS plastic
Max. RPM 600 rpm
Power 90 - 130 VAC; 50/60 Hz; 1.5 A
Cloud connected No
Control Type Analog Variable Speed
Digital dispensing No
Drive height 134 mm (5.3")
Drive IP rating IP 22
Drive length 230 mm (9.1")
Drive width 183 mm (7.2")
Min. RPM 20 rpm
Motor 37 W
Motor hp 1/20
Open-head sensor No
Pump series L/S
Remote I/O Start/Stop
Reversible motor Yes
Speed VariableSpeed control±5%
Type of pump heads accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, Multichannel, High-Performance, Cartridge
Washdown capable No
Current 1.5 A
Frequency 50/60 Hz
Voltage 90 - 130 VAC
